CorPower completes Stage 3 demonstration in Orkney

Results support a step-change improvement in survivability and competitiveness of wave energy.

After 18 months of combined dry and ocean testing of the C3 Wave Energy Converter (WEC), CorPower and project partners have taken important steps towards proving commercial viability of wave energy. By verifying the ability to solve the two major challenges for wave energy, storm survivability combined with significant power production, a major demonstration milestone has been completed. The resonant WEC tested adds new functions to wave energy that are key to unlocking this untapped source of clean and predictable energy

Read more at EMEC webpage and our PRESS RELEASE


3NE5FftQ C3 in scapa flow, Orkney - Credit CorPower









Elaine Buck, Technical Director, at EMEC commented:

“We’re delighted with the success of the project, funded by Wave Energy Scotland. CorPower’s WEC has been put through a rigorous 18-month test programme, beginning with onshore power take-off tests in Sweden using a bespoke hardware-in-the-loop test rig, and culminating with ocean testing at EMEC’s scale test site at Scapa Flow in Orkney. EMEC has overseen the dry and wet testing of the machine, ensuring strict quality management and quality assurance of the verification process and providing Performance Statements for both stages. We are looking forward to further supporting CorPower as they develop their next iteration WEC using the learning from the C3 tests.”

Tim Hurst, Managing Director at Wave Energy Scotland said:

“This is the first of the WES supported technologies to be successfully tested in real sea conditions, and takes us a step closer to demonstrating wave energy technology can be cost competitive with other forms of low carbon generation. We are keen to see this technology demonstrated at full scale.”

Patrik Möller, CEO at CorPower Ocean said:

“Based on the results, the projected performance of the next generation commercial scale C4 machine has been increased. With C4, the structural efficiency of wave energy is expected to improve by more than five times compared to current state-of-the-art, bringing wave energy above 10 MWh/ton, which is comparable to leading wind turbines. Getting more energy with less equipment means lower CAPEX per MW. Smaller lighter machines are easier to handle using low cost vessels, giving less costly operations and maintenance.”

Marit Marsh Strömberg, programme manager at the Swedish Energy Agency said:

“Wave energy is a large untapped source of renewable electricity, with a harsh environment that brings many technical challenges. Corpower has developed a promising wave energy converter with the support of the Swedish Energy Agency. The successful completion of the Stage 3 demonstration project is a key step in bringing Corpower’s technology to commercial maturity. We are pleased to be also funding Corpower’s next stage with a single full-scale device, followed by an array of another three devices.”

Diego Pavia, CEO at InnoEnergy said:

“CorPower is one of the great InnoEnergy success stories, which has gone from strength to strength since our first investment in the company in 2012. Since then it has established itself as one of the leading companies in wave energy, which is proven once again with these break through results – yet another huge step forwards on its journey to commercialisation.”

Rémi Gruet, CEO at Ocean Energy Europe commented:

“Ocean Energy could see 100GW of devices installed by 2050, generating 10% of current EU electricity consumption. Improving reliability, survivability and reducing costs have been identified at EU level as key factors to get there. It is with successes such as Corpower’s that this will become a reality.”

The project that was financed by Wave Energy Scotland, InnoEnergy, Swedish Energy Agency and Interreg Foresea has demonstrated technical capabilities to produce electricity at a competitive cost as volumes increase. This breakthrough in wave energy is based on 30 years of research in hydrodynamics and phase control technology, now proven in its natural environment.

Share  I  Facebook  I  Twitter  I  Linke In  I  Email

What we do


Our Company

Wave power.
To power the planet.

CorPower Ocean brings high-efficiency Wave Energy technology enabling reliable and cost-effective harvesting of electricity from ocean waves.

With our research and development spanning decades, our innovations are inspired by the pumping principle of the human heart. Ocean energy brings stability to the clean energy mix, accelerating the transition to zero-carbon energy.

Headquartered in Sweden, with offices in Portugal, Norway and Scotland, we design, build and install turnkey solutions that allow our customers to power the planet with clean energy from ocean waves.

CorPower Ocean
© 2022 All rights reserved

Headquarters: Stockholm, Sweden.
CorPower Ocean AB.
Västberga Allé 60, 126 30 Hägersten Sweden.
Corporate number: 556584-9824

What we do

Our Company

Copyright © 2021-2022 CorPower Ocean. Headquarters:
Stockholm, Sweden. All rights reserved. CorPower Ocean
AB. Västberga Allé 60, 126 30 Hägersten Sweden.
Organisation number: 556584-9824